Corvette Racing
Duntov Motor Co

RACING CORVETTE PARTS

Duntov Motor Company, LLC

13906-C Denton Drive
Farmers Branch, TX 75234

Toll Free Order Line
(888) 581-3838

Phone (972) 243-3838

Fax (972) 243-3828

Sportscar Vintage Racing

Lake Forest Sportscars
Corvette Grand Sport
Duntov Vintage Racing Cars and Parts
WHEELS
Duntov Vintage Wheel

Duntov Vintage Corvette Wheels

We spent the better part of a year getting our new aluminum vintage wheels just right. They are the lightest vintage wheels on the market at only 14 lbs for the 9.5 inch X 15. They are available in 8.5, 9.5 and 10 inch widths in three offsets. We run 4.75 inch offset all the way around (as measured in the pic below), which requires our Stud Hub at the rear for proper inside clearance.


The wheel centers are 6061-T6 aluminum and are available hard anodized in Gold, Black or machine finish aluminum.


Measured
RW010
One Duntov Vintage Wheel
$952
Width
Offset
Hub Finish
Duntov Wheel Stud Hub

These hubs are a better way of increasing the track of your Corvette without having to use a stack of spacers. When used on the rear, you can use the same wheel offset front and rear without exceeding the usual front track limit. These are sold in pairs and come as shown with 3 inch 1/2 in-20 ARP studs and 1/2 in- 20 lug nuts to secure the assembly to your axle flange. The hub is one inch thick and the studs therefore extend out that one inch plus the thickness of the spindle and the caliper hat.

Free Freight
RE800 Duntov Wheel Stud Hub
RW020
One Axle Set of Duntov Wheel Stud Hubs
$418
bottom

Duntov Motor Company is the exclusive licensee for the continued production of the authentic original Corvette Grand Sport.  Duntov Motor Company is the exclusive licensee for the manufacturing and distribution of the updated street version of this famous car. We service what we sell. We also restore and service 1963-1982 Corvette race, street and performance cars using original and replacement parts including front and rear suspension, brake calipers, brake rotors, brake pads, both J-56 and stock brake caliper pistons, and Corvette stainless steel parking brake parts. We offer the finest original U.S. built Corvette spindles and GM stub axles, along with remanufactured Corvette differentials for both street and race cars. We build both new and rebuilt Corvette trailing arm assemblies for 1965-1982 Corvettes, and offer Corvette street and racing springs and both steel and composite leaf springs in a wide selection of spring rates. Check out our Corvette parts section for shocks, sway bars, upper and lower A-arms, Corvette ball joints, tie rod ends, pitman arms, idler arms, shocks and U-joints.

Site created and maintained by 1 Ton Design
Copyright © 2010-2021 Duntov Motor Company. All Rights Reserved.